Mk2 rear bumper

[Jonanstee]

I've been looking into upgrading my rear bumper from the mk2 to the mk2.5 facelift. I believe the majority of it is bolt off and bolt on apart from the rear fog lights. Is this correct? If so what do I need to  get the swap done? 

[Stoney871]

Rear bumper (of course).

Reverse and fog lights.

Facelift fog/reverse bulb holders as the holders are different to the mk2 ones.

I have a pair sat around somewhere if you need them, they are hard to come by.

Everything else is a straight swap.

[Jonanstee]

39 minutes ago, Stoney871 said:

Rear bumper (of course).

Reverse and fog lights.

Facelift fog/reverse bulb holders as the holders are different to the mk2 ones.

I have a pair sat around somewhere if you need them, they are hard to come by.

Everything else is a straight swap.

Does this mean I need to splice the current wires to fit the bulb holders?

[Stoney871]

2 hours ago, Jonanstee said:

Does this mean I need to splice the current wires to fit the bulb holders?

Indeed.

The bulb holders are different.

They are rare to get hold of but I do have a pair I obtained when planning the same project on my old mk2.

Project binned when I instead chopped it in for my ST.

These are my MK2.5 holders, they lock around the outside of the lens housing-

 

This is the ones on the MK1/1.5 and Mk2 Focus, they lock inside the lens housing-

[Jonanstee]

8 hours ago, Stoney871 said:

Indeed.

The bulb holders are different.

They are rare to get hold of but I do have a pair I obtained when planning the same project on my old mk2.

Project binned when I instead chopped it in for my ST.

These are my MK2.5 holders, they lock around the outside of the lens housing-

 

This is the ones on the MK1/1.5 and Mk2 Focus, they lock inside the lens housing-

How much do you want for them?