xrblue Posted May 30 Share Posted May 30 Hi all The wife's bmax a thrown up a P2562 (Turbocharger Boost Control Position Sensor) fault. I've replaced the turbo pressure solenoid but that hasn't fixed it. Does anyone know of any common problems this might be? It's a 2014 1.5 tdci Thanks Quote Link to comment Share on other sites More sharing options...
Jimpster Posted May 30 Share Posted May 30 Check vacumn lines if you have and give the EGR a damn good clean, clear the codes and run again 1 Quote Link to comment Share on other sites More sharing options...
xrblue Posted May 31 Author Share Posted May 31 On 5/30/2024 at 3:45 PM, Jimpster said: Check vacumn lines if you have and give the EGR a damn good clean, clear the codes and run again Do you know of any good YouTube tutorials? I've looked but I can't find anything specific Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted June 1 Share Posted June 1 That fault code is for the sensor on the end of the turbo actuator. It measures actuator rod movement, not turbo boost pressure. Chances are it'll need a new sensor, unless there's a wiring fault to it instead. 1 Quote Link to comment Share on other sites More sharing options...
xrblue Posted June 5 Author Share Posted June 5 I've cleaned the egr valve and all is good so far 🤞🤞🤞 1 Quote Link to comment Share on other sites More sharing options...
xrblue Posted July 22 Author Share Posted July 22 On 6/5/2024 at 1:58 PM, xrblue said: I've cleaned the egr valve and all is good so far 🤞🤞🤞 Still going strong 💪 💪 💪 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.